RSS

Profilku

BIODATA :

Name               : Ir. Duddy Arisandi, S.T., M.T.

Nation             : Indonesian

Place / Date of birth    : Ampenan / August, 23, 1969

Gender            : Male

Religion          : Moslem

Marital Status: Married with three children

Wife                 : Ihah Sholihah, S. Ag

Children         : 1. M. Husein Haekal, 2. M. Bintang Aththuur, 3. M. Nursyams Zahran

Hobby             : Reading, Sport, Listening music

Address          : Jl. Tapu Ondao Sumasang II, Kav 146, Soroako, 92984, Sul-Sel, Indonesia

WEB :

  1.  https://duddyarisandi.wordpress.com/author/duddyarisandi/
  2. http://www.slideshare.net/DuddyArisandi
  3. https://dateknikenterprise.wordpress.com
  4. https://drive.google.com/drive/my-drive
  1. https://id.linkedin.com/in/ir-duddyarisandi-st-mt-ba047336

E-mail :

  1. duddy_arisandi@yahoo.com
  2. arisandi.duddy@yahoo.co.id
  3. duddy@ats-sorowako.ac.id

HP : 0811421269

1.2   EDUCATION BACKGROUND

1.2.1.1             2013-2015, Strata-2, Mechanical Production Engineer, FTMD-ITB, Bandung Institute of Technology, Bandung

1.2.1.2             1996-1999, Strata-1, Mechanical Engineer, Production Technology, FTI-ITB, Bandung Institute of Technology, Bandung

1.2.1.3             1988-1991, Diploma 3, Maintenance Mechanic, Swiss Project on Polytechnic (now: Politeknik Manufaktur Bandung), PMS-ITB / Politeknik Manufaktur Bandung

1.2.1.4             1985-1988, 3 Senior High School, Bandung

1.2.1.5             1982-1985, 1 Yunior High School, Cimahi-Bandung

1.3   ON THE JOB TRAINING

1.3.1                1995, On The Job Training for Machine Tools Installation, POLMAN-Timah, Bangka.

1.3.2                1995, On The Job Training for Maintenance Procedur & Maintenance Control System, PT PINDAD, Bandung.

1.3.3                1995, Workshop Training in Maintenance System Procedure, PLN Dayeuhkolot, Bandung.

1.3.4                1995, Monitoring for POLMAN-Bandung Student’s on The Job Training at Industries (PT Philips Ralin Electronics; PT Astra Daihatsu Motor; PT Pauwels Arya Sada Trafo Ind.; PT Bukaka Teknik Utama; PT Coca Cola Bottlers; PT Pressindo Hexacipta; PT Unilever Indonesia; PT Dian Surya Global; PT Honda Federal; PT Tjokro; PT Pasti; PT SCKB; PT Hyunday; PT Honda Astra Motor, Jakarta-Bogor-Tangerang-Bekasi.

1.3.5                1996, Workshop in Procedure for Repair and Preventive Maintenance, POLMAN-Bandung, Bandung.

1.3.6                2000, Lecture and Examination for Diploma 4 Student, Observation and Opportunity for business cooperative with POLMAN-Timah, Bangka.

1.3.7                2000, Evaluate for maintenance training program at PTPN VIII, Jawa Barat.

1.3.8                2001, Visiting for Opportunity of business cooperative at  PT INDOCEMENT Tunggal Tbk, Cibinong, Jawa Barat.

1.3.9                2002, Visiting for Opportunity of business cooperative at PT PERTAMINA BALONGAN, Indramayu, Jawa Barat

1.3.10              2005, On Site Project Controller for Telkomsel & Erricson Tower for Sumbagut Area at PT Setia Makmur Cemerlang, Medan

1.4   WORK EXPERIENCE

1.4.1                1991 – 1996Junior Instructoor for Basic Skill, Intermediate Skill, dan Advanced Skill Maintenance Technology for D3 Students & Trainee from industries), Jurusan Teknik Manufaktur, POLMAN-Bandung, Bandung.

1.4.2                1999, Senior Instructor/Supervisor and lecture at Maintenance Eduction Department, Jurusan Teknik Manufaktur, POLMAN-Bandung, Bandung.

1.4.3                1999 – 2000, Head of Sector Maintenance Education Department, Jurusan Teknik Manufaktur, POLMAN-Bandung, Bandung.

1.4.4                2000 – 2002, Head of Maintenance Education Department, Jurusan Teknik Manufaktur POLMAN-Bandung, Bandung.

1.4.5                2000, Member of Senate for STATUTA  Evaluation Committee, POLMAN-Bandung, Bandung.

1.4.6                2000 – 2001, Secretary of Senate Period 2000-2001, POLMAN Bandung, Bandung.

1.4.7                2001-2003, Head of Development-Planning-and Controlled Program for Director Project, POLMAN-Bandung, Bandung.

1.4.8                2002, Steering Committee at Self Evaluation’s and National Accreditation for POLMAN-Bandung, POLMAN-Bandung.

1.4.9                2002-2003, Head of Planning and Controlling Program at Pusat Pelayanan Masyarakat, POLMAN-Bandung.

1.4.10              2003–2004Coordinator for Production System Development at Institusional Development Centre, POLMAN-Bandung.

1.4.11              2004–2005, Operational Director for Tower System, PT Setia Makmur Cemerlang, Jakarta.

1.4.12              2005-2006, Instructor & Lectur for Preventive Maintenance at Maintenance Department, Akademi Teknik Soroako, Sulawesi Selatan.

1.4.13              2005–2006, Head of Maintenance Department, Akademi Teknik Soroako, Sulawesi Selatan.

1.4.14              2005-2007, ISO 9001-2000 Team for Quality Management System, Akademi Teknik Soroako, Sulawesi Selatan.

1.4.15              2006-2008, Internal Auditor for Quality Management System for ISO 9001:2000, Akademi Teknik Soroako, Sulawesi Selatan.

1.4.16              2008, Curriculum Team Development, Akademi Teknik Soroako.

1.4.17              2008-2009, Statuta Team Development, Akademi Teknik Soroako.

1.4.18              2008-2009, Head of PPC Department, Akademi Teknik Soroako

1.4.19              2009, Quality Assurance of Education Department, Akademi Teknik Soroako.

1.4.20              2009-2011, Steering Committee at National Acreditation for Akademi Teknik Soroako .

1.4.21              2009-2013, Steering Committee at Curriculum Development, Akademi Teknik Soroako.

1.4.22              2009-2013, Head of Study Program Education, Akademi Teknik Soroako

1.4.23              2010, Steering Committe on Director Vote, Akademi Teknik Soroako.

1.4.24              2015, Steering Committee at Curriculum Development, Akademi Teknik Soroako.

1.5   TRAINING & SEMINAR

1.5.1                1992, Didactic and Methodic for Teacher/Instructor for PMS-ITB Instructoor & Trainess from Philipines, PMS-ITB, Bandung.

1.5.2                1992, FESTO Didactic Seminar E311 (Introduction for Programmable Logic Controller), PT FESTO, Jakarta.

1.5.3                1993, CNC Training System for CNC Lathe and Milling Machine, PMS-ITB, Bandung.

1.5.4                1993, Introduction to Electro Pneumatic Training, PMS-ITB, Bandung.

1.5.5                1995, Modern Maintenance Management Seminar, PT PINDAD, Bandung.

1.5.6                1996, Introduction to ISO 9000, POLMAN-Bandung, Bandung.

1.5.7                1996, Maintenance Management Course, Swiss Contact-POLMAN-Bandung, Bandung.

1.5.8                1999, Budgeting for Technician Accounting & Academic Supervisor Seminar, POLMAN-Bandung, Bandung.

1.5.9                2000, Non-Contact Vibration Measurement and Application on Portable Pulse-Modal Analysis, PT Ometron, Jakarta.

1.5.10              2000, Maintenance Control CNC Fanuc Serie 0/00/0 Mate, POLMAN-Bandung, Bandung.

1.5.11              2000, Pengatur muda TK1 (II/B), Institut Teknologi Bandung, Bandung

1.5.12              2001, Visual Manufacturing Software Analisys, PT ERP MULTISOLUSI INDONESIA, Bandung.

1.5.13              2001, Environment-Healty-Safety, PT Schlumberger Indonesia, Bandung.

1.5.14              2003, Indonesian Manufacture for Facing AFTA-2003, POLMAN-Bandung, Bandung.

1.5.15              2003, Accounting and Costing Performance, POLMAN-Bandung, Bandung.

1.5.16              2003, Seminar for Internal Evaluating and Monitoring, DIKTI-Depdiknas, Bandung.

1.5.17              2004, Manufacturing Technology Show Case 2004, POLMAN-Bandung, Bandung.

1.5.18              2005, Quality Management System for ISO 9001:2000, ATMI-Akademi Teknik Soroako, Sulawesi Selatan.

1.5.19              2005, Internal Audit for Quality Management System ISO 9001-2000, ATMI-Akademi Teknik Soroako, Sulawesi Selatan

1.5.20              2007, Natioanal Acreditation for Education, Kopertis Wilayah IX, Makasar.

1.5.21              2007, Indonesian Engineer Association, PII-PT Inco, Soroako.

1.5.22              2007, Job Safety Analysis, PT-Inco, Soroako.

1.5.23              2007, Skill of Instructional Teaching (PEKERTI), Kopertis Wilayah IX, Palopo.

1.5.24              2007, Educational Development and health organization, Akademi Teknik Soroako, Soroako.

1.5.25              2008, The Internal Audit Training for Quality Management System, TUV Rheinland, Soroko.

1.5.26              2008, Emotional-Spiritual Quotient, ESQ Leadership Center-YPS-PT Inco, Soroako.

1.5.27              2008, Microsoft Project and Server 2003, Andalan Nusantara Teknologi, Soroako

1.5.28              2008, Self Evaluation in Higher Education, Akademi Teknik Soroako, Soroako

1.5.29              2009, Eight Behaviour of Active Supervision, PT Inco, Soroako

1.5.30              2009, Applied Approach, Kopertis Wilayah IX, Akademi Teknik Soroako.

1.5.31              2009, UKMM-Solve for create new vacancy, Akademi Teknik Soroko, Soroako

1.5.32              2009, The Awareness training for Quality Management System, TUV Rheinland, Soroako

1.5.33              2010, Workplace Assessor, PT Inco, Soroako

1.5.34              2010, Instrument filling for accreditation of Program Studi, Akademi Teknik Soroako, Soroako

1.5.35              2012, Health and Safety (HS/K3), Akademi Teknik Soroako, Soroako

1.5.36              2012, Health and Safety in Workplace, PT Jamsostek & Surveyor Indonesia, Palopo

1.5.37              2015, Challenges Application of Mechanical Engineering Science for Asean Economic Community in 2015-SNTTM-XIV, BKS-TM Indonesia, Universitas Lambung Mangkurat, Banjarsarin

1.6   OTHERS EXPERIENCE

1.6.1  CONSULTANT

1.6.1.1             1995, Maintenance Control System Installation at PT PINDAD, PT Hexacon Jakarta.

1.6.1.2             2001, Optimising of Production Process at PT ARHAPRO, Dapati Project-DIKTI, Tangerang.

1.6.2  ENGINEERING RESEARCH

1.6.2.1             1993, Members of Tools Designer for Machine Tools Calibration for POLMAN-Timah-Bangka, POLMAN Bandung, Bandung.

1.6.2.2             1993, Head Project for Alignment Media Designing for POLMAN-Timah, POLMAN Bandung, Bandung.

1.6.2.3             1994, Factors That Influence Steam Turbine Alignment, Gigih S. / D3-Student & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.4             1995, Implementation Hand Tools Practice Program at Polman-Timah, A. Wahyu P. / D3 Student & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.5             1995, Spot Welding Machine Maintenance on Maintenance Section III in PT Honda Inc. Jakarta, Joko Mulyoto/D3-Student & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.6             1995, Head Project for FAG-Bearing Kit Making for POLMAN-Timah, POLMAN-Bandung, Bandung.

1.6.2.7             1996, Steering Committee for Decision Machine Tools Spesification at Polytechnic Bangkinang, POLMAN-Bandung, Bandung.

1.6.2.8             1998–1999, Analyst for Production Based Education at POLMAN Bandung, ITB, Bandung.

1.6.2.9             1999, Analysis and Improvement Maintenance System  To Decrease Cost and Increase Productivity in Suzuki Main Dealer Workshop-Four Wheel, M. Jufri Dullah/D4-Student & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.10           2000, Design and Manufacture Portable Hydraulic Handpress in Polman (Edi C., Eka R., Harjanto, Handrizal / D3-Studenst & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.11           2000, Design and Manufacturing vibrations Detector for Industry Machinery for Machine Repair Plan, Djatnika, Nino H., Citra S., Satrio R. Rudy S. / D3-Students & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.12           2001, Optimization of Hydraulic Hand Press, Yofi AC., Herman BH., Rinaldi, Tatang S. / D3-Students & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.13           2001, Design and Manufacturing Universal Table for Testing Media for Vibration Caused by Two Shaft Miss-alignment in P2M Laboratory Polman-Bandung, Cepi M.H. / D4 Student & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.14           2001, Analysis of Turning Work Center in Production Laboratory in Manufacturing Engineering Department for Planing and Monitoring Load Production Capacity, Arthur KH. / D4 Student, Ali Suparman, and Duddy Arisandi, Polman Bandung, Bandung

1.6.2.15           2001, Analysis of Machine Tools Component Based On Identification of Frequency Signal, Jasman / D4 Student, Suharyadi P., and Duddy Arisandi, Polman Bandung, Bandung

1.6.2.16           2001, Analysis Production Schedule Making Based on Machine Load and Capacity at Balai Karya Mekanik PT Timah Bangka Tbk., Bustari E. / D4 Student, Wibawa K., and Duddy Arisandi, Polman bandung, Bandung

1.6.2.17           2001, Student Supervisor for Robotic Modelling for Education and Training Invitation, Bolo Dwiartomo and Duddy Arisandi, POLMAN-Bandung, Bandung.

1.6.2.18           2001–2002, Head Project of PICCOLO Turning Making Machines, POLMAN Bandung, Bandung.

1.6.2.19           2002, Wood Profile Combination Machine, Anton Indra G., Ardy S., Mahar B., stephen A. / D3 Students & Duddy Arisandi, Polman Bandung, Bandung.

1.6.2.20           2002, Design and Manufacture Sinus Table-Dual Axial, Bugie W., Hery A., Jeffry O., Lucky S, Tedi G. / D3 Students & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.21           2003, Construction Modification for Alignment Media Practice in Akademi Teknik Soroako, Abdul Rahmat, Beny H. / D3 Students & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.22           2003, Design and Manufacture Sows Seed, Puthut, Ponimin / D3 Students & Duddy Arisandi, Polman-Bandung, Bandung.

1.6.2.23           2003, Design and Setting Production Line for Differential Case Machining Production at PT Mitsumishi Kramayudha Motor, Auliya, Daud Kai Rizal, Dudi A., Wikan Z., Wishnu / D3 Students & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.24           2003, Step Guide for Bending Plate, Komarudin, Agus R. / D3 Students & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.25           2003, Cost Analysis for Assembling Order in Manufacturing Division Polman-Bandung, Ari Abadi / D4 Student & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.26           2003, Determination of Design Cost Based on Design Process and Person Qualification, Rizal / D4 Student & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.27           2003, Actual Production Cost Analysis for Components Order, Bagus Heri / D4 Student & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.28           2003, Milling Work Center Analysis in Production Workshop in Manufacture Division Polman-Bandung (Rahmat Hidayat / D4 Student & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.29           2003, Evaluation of Lead Time, Inventory, Utilization, and Schedule Performance in Pattern, Mould, and Core Sub Division in Foundry Division Polman Bandung, Somawardi / D4 Student & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.30           2003, Evaluation of Lead Time, Inventory, Utilization, and Schedule Performance in Foundry Workshop in Polman Bandung (M. Izwar / D4 Student & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.31           2003, Design of “Sleeve Side” Hot Press Machine, Bustami Ibrahim / D4 Student & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.32           2003, Turning Machine and Sparepart Database Making for Anual Maintenace Cost and Budgeting in UPT Pemeliharaan dan Perbaikan Mesin Polman Bandung, R. Rudi Suharyo / D4 Student, Agus Widarsa & Duddy Arisandi, Polman-Bandung, Bandung

1.6.2.33           2004, Measuring and Analysis Product Defect, Muhammad Padang / D4 Student & Duddy Arisandi, Polman Bandung, Bandung

1.6.2.34           2006, Design and manufacture Manual Bending Machine (Sukirman, Firman A., Nober Tato K., Yuanitha K., Herwin S., Syahril /D3 Student, Duddy Arisandi, Akademi Teknik Soroako, Soroako

1.6.2.35           2007, Design and Manufacture for Vise and Clamping, Harun / D3 Student, Duddy Arisandi and Ichsan Ristiawan, Akademi Teknik Soroako, Soroako

1.6.2.36           2007, Design and Manufacture Jig Saw / Scroll Saw, Esra T, Rahmat Hidayat / D3 Students, Duddy Arisandi and Ichsan Ristiawan, Akademi Teknik Soroako, Soroako

1.6.2.37           2008, Design and Manufactur Shear Cutting Machine with Manual Hand Shear, Agus Salim, Masidul / D3 Students & Duddy Arisandi, Akademi Teknik Soroako, Soroako

1.6.2.38           2008, Design for Tempe Slicing Machine, Dita HD / D3 Student & Duddy Arisandi, Akademi Teknik Soroako, Soroako

1.6.2.39           2009, Machine for Cleave Coconut Shell and Separating Coconut Meat, Andi Sudirman, M. Fadli B., Marsal, Fuad H., Fitriani / D3 Students, Duddy Arisandi, Simon Pareke, Dani Setiawan, Akademi Teknik Soroako, Soroako

1.6.2.40           2010, Design and Manufacture Gear alignment and Optical Alignment, Novi A., Roy Simon, Fiqhi R., M. Imron, Mardianto T., Fitri Sari, Tajuddin /D3 Students, Duddy Arisandi, Harjuma, Sabil, Akademi Teknik Soroako, Soroako

1.6.2.41           2011, Design and Manufacture Simple Bending Test Machine, Aan Nugraha, Syainal Abidin, Fajria Fahmi, Imanuel Malino, Ishak Panompo / D3 Students, Duddy Arisandi, Simon Pareke, Fitriana Firdaus, Akademi Teknik Soroako, Soroako

1.6.2.42           2011, Design and Manufacture Equipment Test For Journal Bearing and Their Lubricate System, Hamrun, J. Pasomba, Eva Sofiana, Lukius, Lukman / D3 Students, Duddy Arisandi, Dani Setiawan, Ichsan Ristiawan, Akademi Teknik Soroako, Soroako

1.6.2.43           2012, Design and Manufature Turning Machine Tools for Spiral Motive Product , Hadi W., Justi Konda, Asdan, Ardi Sahputra, Asrul arifin / D3 Students, Duddy Arisandi, Ichsan Ristiaawan, Akademi Teknik Soroako, Soroako

1.6.2.44           2012, Design and Manufacture Tensile Test Machine for Arc and Gas Welding Product, Haniel S.T.,  Kasril, Amri, Supatmi, Jefri A.P. / D3 Students, Duddy Arisandi, Marthin Randan, Akademi Teknik Soroako, Soroako

1.6.2.45           2013, Design and Manufacture Ergonomic Engine Mounting, Karno, M. Assyidik A., Rini M., Adriansyah, Faisal Nuralim / D3 Students, Mastam M., Duddy Arisandi, Kartiny Taslim, Akademi Teknik Soroako, Soroako.

1.6.2.46           2013, Design and Manufacture Drain, Filter, and Coolant Fill Portable Machine, M. Asfiar T., Sartika, Hartini K., M. Fitrah, Shuardi S. / D3 Students, Jasman, Zulkarnain A., Duddy Arisandi, Akademi Teknik Soroako, Soroako

1.6.2.47           2013, Optimation of Turning Machine for Spiral Motive by Electric Power (Supriyandi, Suryo P., Yehiel B., Hilal A., Zulva S. / D3 Students, Sirama, Ichsan R., Duddy Arisandi, Akademi Teknik Soroako, Soroako

1.6.2.48          2014, Curriculum Evaluation and Development Based on Competency Based (case studi : ATS-Curriculum 2007)

1.6.2.50           2015, Feature Based Product Design, Manufacture, and Inspection, Proceeding Seminar Nasional Tahunan Teknik Mesin / SNTTM-XIV, Indra Djodikusumo, Duddy Arisandi, Ruswandi, Universitas Lambung Mangkurat, Banjarmasin

1.6.2.51           2015, Power Transmission AlternativeDesign From Propeller Turbine to Shaft Generator Using TRIZ, Proceeding Seminar Nasional Tahunan Teknik Mesin / SNTTM-XIV, Indra Djodikusumo, Fachri Koeshardono, Iwan Sanjaya Awaludin, Duddy Arisandi, Ruswandi, Universitas Lambung Mangkurat, Banjarmasin.

1.6.2.52           2015, Feature based Five Axes CNC Programming for Runner Manufacturing of  Propeller Turbine, Seminar Nasional Tahunan Teknik Mesin / SNTTM-XIV, Indra Djodikusumo, Ruswandi, Duddy Arisandi, Universitas Lambung Mangkurat, Banjarmasin.

1.6.2.53           2015, Improvement for The Quality of Final Examination of Product Student (Design, Manufactur, or Reverse Engineering) Through Improve The Quality of Engineering Drawing, IRONS6th Industrial Research Workshop and National Seminar, Duddy Arisandi, Ruswandi, Politeknik Negeri Bandung, Bandung.

1.6.2.54           2015, Feature based Reverse engineering Using Geomagic Design-X Software-Case Study of Engine Block Model 465Q, Duddy Arisandi / FTMD-ITB Student & Indra Djodikusumo, FTMD-ITB, Bandung

1.6.2.55           2016, Setting up The Technology Adaptation Through Understanding of Process and Human Resources Competency Preparation, SENIATI 2016 Green Technology Innovation, Duddy Arisandi,  FTI-ITN Malang, Malang.

1.6.3  PRESENTER / KEY NOTE SPEAKER

1.6.3.1             1995, Workshop training for Educational System, PT United Can Company, Jakarta.

1.6.3.2             1999, Workshop for Production Planning and Control, POLMAN Bandung, Bandung.

1.6.3.3             2000, Bench Marking Maintenance Program for Indonesian Polytechnic Instructor, EEDP, POLMAN Bandung.

1.6.3.4             2001, Study Conference on Production Based Education System for GOTEVOT-ARAB, POLMAN-Bandung, Bandung.

1.6.3.5             2003, SMESCO Festival (Reduction Production Cost Through Maintenance Activity, Swiss Contact), Swiss Contact, Jakarta.

1.6.3.6             2003, Indonesian Manufacture for Facing AFTA-2003 (Predictive Maintenance), POLMAN-Bandung, Bandung.

1.6.3.7             2003, Product Development Strategyc for Manufacturing Industries (Jakarta Conventional Center), Swiss Contact – Bds Provider, Jakarta.

1.6.3.8             2004, Manufacturing Technology Show Case 2004 (Moderator for Enterprise Resource Planning), POLMAN-Bandung, Bandung.

1.6.3.9             2008, Campaigner for Energy Conservation at YPS-PTI (Campaigner), Toastmaster International-PTI, Soroako

1.6.3.10           2010, Peningkatan Ketrampilan Dasar Teknik Instruksional (PEKERTI) & Applied Approach (AA), Akademi Teknik Soroako, Soroako.

1.6.3.11           2015, Reverse Engineering, PLN &  FTMD-ITB, Pusharlis PLN-Bandung,

1.6.3.12           2016, Reverse Engineering, PLN & FTMD, Pusharlis PLN-Bandung

1.6.4  COMMETTEE

1.6.4.1             1994,1995,1996, 2000, Entrance D3KT Student Test & D3 Examination Test, POLMAN-Bandung, Bandung.

1.6.4.2             1995, ITB of Creation and dedication for Exhibition, Stand Officer, Institut Teknologi Bandung, Bandung.

1.6.4.3             1999, Choice for POLMAN-Bandung Director, Senat Member, POLMAN-Bandung, Bandung.

1.6.4.4             2000, Planner for maintenance apprentices syllabus for GULF Indonesia Resources, POLMAN-Bandung, Bandung.

1.6.4.5             2000, Choise for Head of Manufacturing Technology Major Program, Member, POLMAN-Bandung, Bandung.

1.6.4.6             2000, Auction and Provisioning for Tools and Maintenance for 2000 year of  budgeting, Member, POLMAN-Bandung, Bandung.

1.6.4.7             2000, Proposal Planner for Technological and Professional Skill Development Sector Project (TPSDP), Members, POLMAN-Bandung, Bandung.

1.6.4.8             2000, Relevance Increasing for Higher Technical Education (Fund-Prf Relevancy Program), Member, POLMAN-Bandung, Bandung.

1.6.4.9             2000, Establishing for New Studi Program of Manufacturing Information Technology (MIT for JICA Program), Member, POLMAN-Bandung, Bandung.

1.6.4.10           2000, Engineering for Making and Modification and Overhaul Positive Displacement Pump (P5 Wax Plant Pertamina UP-V Balikpapan), Member, POLMAN-Bandung, Bandung.

1.6.4.11           2001, Proposal Planner for Indonesian German Institute Project, POLMAN-Bandung, Bandung.

1.6.4.12           2002, Planner for POLMAN-Bandung Curriculum 2002, Member, POLMAN-Bandung, Bandung.

1.6.4.13           2002, Proposal Planner for JICA Program (Indonesia-Japan), Member, POLMAN-Bandung, Bandung.

1.6.4.14           2004, Manufacturing Program Planning for 2004 year budgeting, Coordinator Manufacturing Major Program, POLMAN Bandung, Bandung.

1.6.4.15           2007, Curriculum Improvement Committee, Member, Akademi Teknik Soroako, Soroako

1.6.4.16           2010, Choice for Akademi Teknik Soroako Director, Secretary commitee, Akademi Teknik Soroako.

1.6.4.17           2010, Curriculum Improvement Committee, Evaluator, Akademi Teknik Soroako, Soroako

1.6.4.18           2009-2013, Members of Senat Akademi Teknik Soroako

1.6.4.19           2016, Curriculum Improvemnet Committee, Evaluator, Yayasan Pendidikan Soroako & Akademi Teknik Soroako.

1.6.5 AUTHOR AND TRANSLATOR

1.6.5.1             1992, Arisandi Duddy, Maintenance for Technician (Translator), Industrial Training Board-Australia, POLMAN-Bandung, Bandung.

1.6.5.2             1992-1993, Arisandi Duddy., Theory of Antifriction Bearing., POLMAN-Bandung, Bandung.

1.6.5.3             1992-1993, Arisandi Duddy., Practical of Mounting and Dismounting for Antifriction Bearing., POLMAN-Bandung, Bandung.

1.6.5.4             1993-1994, Arisandi Duddy., Theory of Mechanical Drive Alignment., POLMAN Bandung, Bandung.

1.6.5.5             1993-1994, Arisandi Duddy., Practical for Mechanical Drive Alignment., POLMAN-Bandung, Bandung.

1.6.5.6             1993-1994, Arisandi Duddy., Theory of Hand Tools and Power Tools., POLMAN-Bandung, Bandung.

1.6.5.7             1993-1994, Arisandi Duddy & UC Suyono., Practical for Hand Tools and Power Tools User., POLMAN-Bandung, Bandung.

1.6.5.8             1995, Arisandi Duddy., Theory of Machine Tools Callibration., POLMAN-Bandung, Bandung.

1.6.5.9             1995, Arisandi Duddy., Practical for Machine Tools Callibration (Draft & not yet publication).

1.6.5.10           1995, MH Cepi, MZ Darman, Arisandi Duddy, Priambodo Kukuh., Maintenance Management for Indonesian Polytechnic., POLMAN-Bandung & Swiss Contact., Bandung.

1.6.5.11           2001, Duddy Arisandi., Introduce of Production Planning and Control for D4 Student D4 (Load Oriented Order Release)., POLMAN-Bandung., Bandung.

1.6.5.13           2010, Arisandi Duddy, Buku Ajar Perencanaan dan Pengendalian Produksi, Akademi Teknik Soroako, Soroako.

1.6.6  LECTURE / TEACHER / INSTRUCTOR (D3 & D4 STUDENT at POLMAN-Bandung & Akademi Teknik Soroako)

1.6.6.1            1991–1996 & 1999–2004, Polman-Bandung, Total: 170,5 SKS (Credit of Semester), 73 Event

Manufacturing technology, Hand Scraping, Maintenance and Repair, Machine Tools Calibration, Mechanical Drive Alignment, Mounting and Dismounting Bearing, Preventive maintenance, Hand Tools, Machine Elements, Mechanic of Material, Strength of Material, Basic of Machine Construction, Industrial Metrology, Theory and Practical approach for Statistic, Statistic Quality ControlCalculus, Engineering Mathematic, Preventive Maintenance Management, Predictive Maintenance Management, Maintenance Management, Production Management, Production Planning & Control, Lubricate and Lubrication, Machine Tools Repair, Machine Tools Making, Hand and Power Tools, Pump and Installation, Compressor and Installation, Engine Maintenance, Fabrication and Production, Manufacturing Advanced Technology.

1.6.6.2            2005–Now, Akademi Teknik Soroako, Total: – 150 SKS (Credit of Semester), 73 Event

 Theory and Practice of Bearing, Mechanical Drive Alignment, Lubricate and Lubrication, Component Making and Repair, Pump and Installation, Preventive Maintenance Management, Production Planning and Control, Machine Repair and maintenance, Machine making, Design Methodology, Machine Technical Drawing, Basic Engineering Drawing.

1.6.7  CONSELOR FOR END FINAL PROJECT (D3 & D4 STUDENT at POLMAN-Bandung, D3 STUDENT from UPI, D3 STUDENT from LPPA, S1 STUDENT from Univ. Widyatama, S1 & S2 STUDENT from  ITB, S2 STUDENT from  UNPAD, and D3 for Akademi Teknik Soroako Student)

1.6.7.1            1991–1996 & 1999–2004 & 2006-Now, Total: 140 SKS (Credit of Semester),  -47 Title

Maintenance Management, Production Planning & Control, Production Management, Cost Accounting, Information System, Integrated System at Manufacturing System, Quality Assurance, Design & Production of Product, Machine Tools Repair, Component Making, Machine Tools Design and Making, Laser system tools for mechanical drive alignment. Technology Concept (Antek-1), Geometric Dimensioning & Tolerancing, Reverse Engineering

1.6.8  MODERATOR & EXAMINER for FINAL PROJECT (D3 & D4 STUDENT at POLMAN-Bandung & Akademi Teknik Soroako)

1991–1996 & 1999–2004 & 2006-Now, Total: 19 SKS (Credit of Semester), 73

1.6.8.1             1994, Alignment Steam Turbine, Gigih / D3 Student, Politeknik Manufaktur Bandung, Bandung.

1.6.8.2             1994, Coupling Alignment, Ishak Pammu / D3 Student, Politeknik Manufaktur Bandung, Bandung.

1.6.8.3             1994, Knowing The Functional and Main Part Turning Machine Maintenance, Marthin Randan / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.4             1994, An Effort to Implementation Preventive Maintenance for Turning Machine at ISTC Soroako, Hendra / D3 Student, Politeknik Manufaktur Bandung, Bandung.

1.6.8.5             1994, Preventive Maintenance Procedure for Machine at ATS-ISTC, Sirama / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.6             1994, Maintenance Process for Relief Valve Francis Turbine in PLTA Ubrug Sukabumi, Yofi / D3 Student, Politeknik Manufaktur Bandung

1.6.8.7             1995, Implementation of Hand Tools Practical Program at Polman Timah, D3 Student, Politeknik Manufaktur Bandung.

1.6.8.8             1995, Daily and Monthly Maintenance for Type SLP35 Spot Welding at III Maintenance Section in PT Honda Federal Inc. Jakarta, Joko M. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.9             1995, Tools for Lifting Workpiece (Spindle Seat) at Drill & Mill Machine, Petrosian S. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.10           1995, Machine Maintenance Procedure in PT Oriental Asahy Liman, M. Sadiyo / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.11           1995, Machine Felts Maintenance in Palm Oil Mill Bah Jambi PT Perkebunan Nusantara VIII, Pangaloan Sibuea / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.12           1995, Preventive Maintenance System in Kettle Stew (Sterilizer) in PTP VII Bah Jambi, D3 Student, Politeknik Manufaktur Bandung.

1.6.8.13           1995, Fixture for Grill Opening Position Air Conditioned Tunel A for Garbarata CA003-Changi Project, Arvieno H. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.14           1995, Preventive Maintenance for Core Dryer in PTP VII Gunung Bayu, Juara Gultom / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.15           1995, Otomation for Deburing Safety Seat, D3 Student, Politeknik Manufaktur Bandung.

1.6.8.16           1995, Machine Numbering System at PT SCKB, M. Nasirullah / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.17           1995, Preventive Maintenance Implementation in Shop & Component Division at PT Bukaka Teknik Utama, Politeknik Manufaktur Bandung.

1.6.8.18           1995, Sadle Crane Assembly at PT Bukaka Teknik Utama, D3 Student, Politeknik Manufaktur Bandung.

1.6.8.19           1996, Pierching and Embossing Panel Quarter Right/Left (900x800x400mm) at PT Stallion, Helful / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.20           1996, Scoring System for Mecanical Engineering Drawing at Polman Timah, Sugianto / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.21           1996, Assembly Process for Turn Over Unit, Andreas Sihono / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.22           1996, Improvement for Tool Store Coordination at PT Coca Cola Botler Amatil Jakarta, Eko M. Arifin / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.23           1996, Otomation Planning for Rotary Table at Painting Unit/Gun Division at PT PINDAD Persero Bandung, Tedi Belarosa / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.24           1996, The Useful of Tools and Measuring Tools Storage and Manage at PT Coca Cola Amatil Jakarta, Dionisius KS / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.25           1996, Tunnel Garbarata Component Order Procedure at PPC PT Bukaka Teknik Utama, Aris M. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.26           1996, Improvement The Work Effectiveness Through Training and Development Program at PT Honda Federal Inc., Farian R. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.27           1996, Tunnel Roller Adjustment for Garbarata Product at PT Bukaka Teknik Utama, Basuki Indra / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.28           1996, Manifold MB 700 Checking Fixture Making at PT Presindo Hexacipta, Iwan Bastian / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.29           1996, Extended  Long Live Catoda in Zink Acid Coating at Surface & Heat Treatment Department in PT PINDAD Persero, Pujiatmiko / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.30           1996, Tail Stock Urano Turning Machine Making at PT Bukaka Forging Industries, Ali Faizin / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.31           1996, Schotman  Machine –  Hydraulic System Solve Problem at PT Labtech Penta International, Ahmad Fauzan / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.32           1996, Gearbox Contruction for Workpiece Mounting in Buffering Machine, Jaya J. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.33           1996, Cutting Shearing Machine Proventive Maintenance at Steel Tower Division, Hymsyar Nainggolan / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.34           1996, Work Instruction & Standard Time for Luminaire Assembling in Assembling Unit at PT Phyllips Ralin Electronic Jakarta, Eri Munandar / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.35           1996, Personal Criteria at Technical Design Division in PT Labtech Penta International, Zulbahri / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.36           1996, Clamping system for Loading Technology in Brass Forging Process (Valve Product Otomation), Eri Gumilar / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.37           1996, Belt Conveyor Maintenance Evaluation for Walls Ice Cream Transfer at PT Unilever Indonesia, Didik Purwanto / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.38           1996, Hard Chrome Plating for Collector Bearing Bore Repair at Allison 250C-20 Machine in Universal Maintenance Center Division PT IPTN, Christofel NM / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.39           1996, The Importance of Inspection and Lubricating Schedule of Production Machinery, Willy S. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.40           1996, Preventive and Repair of Keyways Failure of Hydraulic Shaft Oil Pump of Turning CNC Cincom F12 Machine at  PT PINDAD, Kodiron / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.41,          1996, The Goal of Maintenance of Machine at Finishing Department in PT Dian Surya Global Tangerang, Dedi H. / D3 Student, Politeknik Manufaktur Bandung.

1.8.42,             1996, Thermo Spray Technology for Repairing Aeroplane Component at UMC-PT IPTN Bandung, Fendy Murphy / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.43           1996, Material Cutting Time Standard Making at Cutting Shop PT Bukaka Forging Industries Bogor, Tito G. / D3 Student, Politeknik Manufaktur Bandung.

1.6.8.44           2000, Soybean Process Tools Modification in Tempe Industry, Abdul W., Andi A., Andri R., Lucky L., Samudro S. / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.45           2000, Heat Treatment Machine Design, Doni W., Sobari, Widi N., Farid A., Arif W. / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.46           2000, Mold Ventury Pipe Analyze and Design Modification doe to Product Problem, D3 Students, Politeknik Manufaktur Bandung.

1.6.8.47           2000, Analyze and Problem Solving at Fuel Filter Painting Process in PT SS, Andi F., Angga P., Sigit P., Eko P., Ressy A. / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.48           2000, Pin Pre Assembling for Teen Scene, Ahmad I.R., Indra B., Rais R., Irfan F. / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.49           2000, Design and Manufacturing for Hydraulic Handpress, Edi C., Eka R., Harjanto, Handrizal K. / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.50           2000, Boring Process Design for Semi-Automatic Onion Slicer Type KS-905, Alex H., Asep H., Ganjar M., Muhidin / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.51           2001, Retainer Lock Press M/C Modification, D3 Students, Politeknik Manufaktur Bandung.

1.6.8.52           2001, ASM Robot Redesign and Simulation, D3 Students, Politeknik Manufaktur Bandung.

1.6.8.53           2001, Production Planning and Control Evaluation at ATMI Surakarta and Suggestion for Improvement, R. Priyoko / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.54           2001, Design for Dynamic Tensile Strength Machine and Manufacturing Holder Part, Rusdi Nur / D4 Student, Politeknik Manufaktur Bandung

1.6.8.55           2001, Turning Work Center Analysis at Production Laboratory Jurusan Teknik Manufaktur, Arthur Halik R. / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.56           2001, The Effect of Reduction Grade to Wire Pull Force in Cold Process, Mechanical Properties, and Micro Structure, Jamhari / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.57           2002, Design and Manufacturing of Quenching Media Container With Propeller Agitator, Ahmad Yusuf, Deden W., R. Ade, Ricky P. / D3 Students, Politeknik Manufaktur Bandung

1.6.8.58           2002, Polishing Machine Using Kinematic Motion System, Agus H., Eko N., M. Maulana, Ria Y., Novia / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.59           2002, Combination Machine for Wood Profile, Abdi S., Andreas F., Freddy P.B., Indah R., Maya S. / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.60           2003, Perfecting of ASM EAEO 1e Robot Implementation, D3 Students, Politeknik Manufaktur Bandung.

1.6.8.61           2003, Lubrication System for Journal Bearing Media, Antonius Adi / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.62           2003, Overhaul Steps for Schaublin 53 N Milling Machine, D3 Students, Politeknik Manufaktur Bandung.

1.6.8.63           2003, Line Production Design and Making for FE 347/477 and FE 349 Differential Case Macining in MKM, Daud K.R., Dudi, Wikan, Wisnu / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.64           2003, Milling Work Center Analysis at Production Laboratory Jurusan Teknik Manufaktur, Rahmat Hidayat / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.65           2003, Design and Manufacturing of Seed Spreader, Puthut, Ponimin / D3 Students, Politeknik Manufaktur Bandung.

1.6.8.66           2003, Step Guide for Bending Plate, Komarudin, Agus R. / D3 Studtents, Politeknik Manufaktur Bandung.

1.6.8.67           2003, Evaluation of Lead Time, Inventory, Schedule Performance, and Utilization for Foundry Production Laboratory, M. Iswar / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.68           2003, Assembling Price Order Analysis in Mechanical Department, Ari Abadi / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.69           2003, Machining Component Order Price Analysis in 2002 Year, Bagus Heri / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.70           2003, Evaluation of Lead Time, Inventory, Schedule Performance, and Utilization for Pattern and Core Workshop in Foundry Production Laboratory, Somawardi / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.71           2004, Geometrical Test for Aciera F3 Milling Machine, A.S.D.R. Amaral / D4 Student, Politeknik Manufaktur Bandung.

1.6.8.72           2004, Turning Machine Data Based & Component Making for Budgeting in Maintenance Cost at UPT P2M, R. Rudi Suharyo / D4 Student, Politeknik Manufaktur Bandung.

1.6.9  ENGINEERING & PRODUCTION SYSTEM at (POLMAN-Bandung)

1.6.9.1             1991–1996 & 1999–2004, Total: 39 Event

Maintenance Management, Production Planning & Control, Production Management, Cost Accounting, Information System, Quality Assurance, Design & Production of Product, Machine Tools Repair, Component Making.

1.6.10         TRAINER (POLMAN-Bandung & Akademi Teknik Soroako)

1.6.10.1           1991–1996 & 1999–2004 & 2006-Now, Total: 65 Event (5,500 hours)

Maintenance Management, Production Planning & Control, Production Management, Cost Accounting, Information System, Quality Assurance, Design & Production of Product, Machine Tools Repair, Component Making, Basic Maintenance Skill, Intermediate Maintenance Skill, Advanced Maintenance Skill

Trainee comes from:

PTP XIII Nusantara, ISTC, PT Jembo Cable, PT Inti Pantja Press Industries,  PT Semen Padang, PT Media Abdi Prima, PTP VII Bah Jambi, PT Siemens Cable Optic, PT Ekatama Ratna Persada, PT Tambang Timah, PT Astra Daihatsu Motor, PT South Pacific Viscose, PT Astra Daihatsu Motor, CV Pesantren 17, LIN-LIPI, PT Pindad, PT Great Giant Pine Aple, POLMAN-Timah, ISTC-Inco, PT Pupuk Kaltim,  PT Perkebunan XIII, Politeknik se-Indonesia-Dikti, PT Arun NGL Co., PT Avebe Indonesia, PT Karya Hidup Sentosa, Politeknik Payakumbuh, PT CCSI-Indonesia, PT Schott Iger Glass, Politeknik Negeri Medan, Politeknik Negeri Padang, POLMAN-Timah, Universitas Pendidikan Indonesia, PT Pertamina Balongan, PT Arhapro, Universitas Ambon, Retooling-DIKTI, PT Indocement Tunggal Prakarsa, Gotevot-Arab, PT Inco, PLN

1.7  APPRECIATION

1.7.1           FROM POLMAN-Bandung Director

November, 2000: As Coaching at Indonesian Robot Contest 2000 (Graha ITS Surabaya)

1.7.2           FROM POLMAN-Bandung Director

April, 19, 2003: As Head of Development-Planning-and Controlled Program for Dedication in carry out task without tired and watching time, and finished all task in best manner and destination.

1.7.3           FROM POLMAN-Bandung Director

April, 19, 2003: As Head of Development-Planning-and Controlled Program for Dedication and Participation to bring a reality that POLMAN-Bandung became a first Government Institutional in Indonesia for Education which receive Quality Management system certificate ISO 9001 : 2000.

1.7.4           FROM YAYASAN PEMBINA ROHANI ISLAM SOROAKO

Jumadil Akhir, 1429 H: Participant ad Mosque developing program (Civil supervisor).

1.8  PROFESIIONAL MEMBERS

1.8.1           PERSATUAN INSINYUR INDONESIA

August, 2007 – NOW: Badan Kejuruan: Teknik Mesin (No. anggota: 2208-09-018482)

1.8.2           FORUM DOSEN INDONESIA

December, 2015 – NOW: (No. anggota: 00250)

 

 

52 responses to “Profilku

  1. ibnu siswanto

    September 8, 2011 at 3:58 am

    boleh minta alamat imelnya tidak pak?
    saya ibnu siswanto (akhibnu_sleman1@yahoo.com)..mahasiswa pasca sarjana UNY

     
  2. Ali Suparman

    September 19, 2011 at 1:33 am

    Mas Duddy,
    Blog-nya bagus, isinya juga bermanfaat sekali. Semoga terus nulis dan membagi ilmu.
    Sukses selalu

    Ali Suparman, POLMAN-Bandung

     
    • Duddy Arisandi

      September 23, 2011 at 12:23 pm

      Mas Ali, terimakasih banyak Mas. Banyak pelajaran dan yang saya peroleh dari Mas Ali. Masih tulisan-tulisan dulu yang saya launching, mudah-mudahan kedepannya ada beberapa tulisan baru yang segera rampung. Sukses selalu mas.

       
  3. Anto Tea

    Oktober 21, 2011 at 6:55 am

    Damang Mas?

     
    • Duddy Arisandi

      Oktober 21, 2011 at 10:04 pm

      Alhamdulillah Anto, apa khabar? Sukses selalu Kang.

       
  4. guiril azis

    Oktober 22, 2011 at 11:25 am

    sangatt bangga..pernah menjadi murid anda…

     
    • Duddy Arisandi

      Oktober 22, 2011 at 3:03 pm

      Terimakasih Guiril, saya juga bangga belajar banyak dari anda. The true lecture is ‘student it self’. Salam buat temen-teman seangkatan.

       
  5. iin parlina tamidu

    Oktober 22, 2011 at 3:46 pm

    bisa di blng.. sekarang saya tertarik dengan membaca!!

     
    • Duddy Arisandi

      Oktober 22, 2011 at 11:03 pm

      Insyaallah, mudah-mudahan menjadi tantangan untuk menjadi professional technician dan professional enginer. Jangan lupa, baca dengan menyebut nama Tuhan YME. Have a nice week end.

       
  6. Syahidul Anam

    Oktober 26, 2011 at 10:15 am

    Hebat and luar biasa… Perlu dicontoh konsistensi dan profesionalismenya. Pingin belajar sama Mas Duddy Arisandi

     
    • Duddy Arisandi

      Oktober 26, 2011 at 1:24 pm

      Bang Syaidul Anam, hatur nuhun. Kita sama-sama belajar Bang, mudah-mudahan dari share ini dapat mempercepat peningkatan kualitas pendidikan di negeri ini. Terkadang orang berfikir harus dimulai dari awal untuk melakukan sesuatu, namun pada kenyataannya hal tersebut dapat dipercepat melalui ‘berbagi’ dari apa-apa yang pernah dilakukan oleh rekan-rekan kita sebelumnya. Nice to meet you, salam kenal Bang.

       
  7. maharuddin hasibuan

    November 20, 2011 at 2:48 pm

    assalamu’alaikum
    saya maharuddin
    suksesselalu pak

     
    • Duddy Arisandi

      November 21, 2011 at 1:05 am

      Wa’alaykumsalam, Terimaksih Pak Maharuddin & sukses selalu juga.

       
  8. dwi e wijayanto

    November 24, 2011 at 12:41 am

    bravo kang duddy.yang semangat belajar mash tinggi untuk mencerdaskan anak bangsa khususunya dibidang manufaktur.pabrik gelas diindonesia sudah banyak tapi otang yang menciptakan orang yang mendirikan pabrik sedikit sekali.salam hangat dari dwi km 92

     
    • Duddy Arisandi

      November 24, 2011 at 10:20 pm

      Hatur nuhun Mas Wijayanto, semoga bermanfaat. Mudah-mudahan Indonesia Emas di 2020 akan terwujud.

       
  9. m nurzaman

    Desember 1, 2011 at 2:04 am

    four thumb up for kang duddy,..
    semoga sukses terus dan selalu dalam lindungan Allah SWT

    mantan murid di polman 97

     
    • Duddy Arisandi

      Desember 1, 2011 at 2:35 am

      Amin, terimakasih Mas Nurjaman. Sukses selalu & salam untuk keluarga.

       
  10. Rusdiana Junaid

    Desember 1, 2011 at 7:52 am

    Assalamu’alaikum pakDuddy, thanks for sharing your blog. It is just so great. You’ve so many enormous activities and experiences which are useful to share. Keep on doing great jobs🙂

     
    • Duddy Arisandi

      Desember 2, 2011 at 2:33 pm

      Wa’alaykumsalam Mrs Rusdiana, it’s been long time not see you again. Thanks you for your support. There are many reason to make acceleration about education in our country. Share many things to each other will help us to reach the dream at 2020 (Gold of Indonesia).

       
  11. deli

    Januari 4, 2012 at 9:15 am

    bangga mengenal bapak baik sbagai dosen, atasan, n tman kerja banyak karia bapak yang sangat membantu…….

     
  12. Rudy Ariyanto

    Maret 1, 2012 at 12:02 pm

    Salam kenal kang duddy,

    Kang Duddy perkenalkan saya Rudy dari salah satu instansi swasta di Jakarta, mungkin nggak dapat dibantu utk rekomendasikan alumni swiss politeknik bandung yang fresh grad, utk memenuhi kebutuhan tenaga di kita, terimakasih dan salam

     
    • Duddy Arisandi

      Maret 15, 2012 at 8:19 am

      Salam kenal juga Mas Rudi, terimakasih sudah berkenan berkunjung ke Blog kami. Untuk merekomendasikan Alumni Politeknik Mekanik Swiss / Politeknik Manufaktur Bandung (fress graduate), sebaiknya dapat menghubungi langsung ke sana Mas (0222500241), dapat menghubungi ke Bp Suharyadi Pancono (As Dir Bidang Pendidikan). Maaf, sejak tahun 2005, saya sudah tidak bekerja di sana. Namun, sampai sekarang masih tetap bersilaturahim di udara. Sukses selalu Mas Rudi.

       
  13. Andi Sudirman

    Maret 1, 2012 at 2:12 pm

    semoga sukses terus dan selalu dalam lindungan Allah SWT
    Amin….. Amin….Amin…

     
    • Duddy Arisandi

      Maret 16, 2012 at 1:03 am

      Amin & Terimakasih Bung Andi.

       
  14. Irwan Efendi, ST

    Maret 19, 2012 at 5:57 pm

    Salam kenal mas…..

     
    • Duddy Arisandi

      Maret 26, 2012 at 7:11 am

      Salam kenal Juga Mas Irwan Efendi. Semoga bermanfaat.

       
  15. Rhyno

    Mei 16, 2012 at 3:21 am

    tanggal lahir dan bulan kelahirannya pak duddy sama persis dengan saya. semoga ada pengaruhnya dengan kinerja dan semangat belajar saya kedepannya. kalau bisa harus lebih baik dari pak duddy. hehehehehehehe

     
    • Duddy Arisandi

      Mei 27, 2012 at 12:12 pm

      Alhamdulillah, semoga Rino. Yang jeleknya dari saya jangan ditiru ya.

       
  16. Arieabdul

    Juni 6, 2012 at 3:30 pm

    Subhaanallaah, keren mas..!!
    Salam kenal, mas.. Tahun ini saya kuliah di Polman Bandung, semoga saya bisa mengikuti jejak sukses seperti anda.. Aamiin😀

     
    • Duddy Arisandi

      Juni 6, 2012 at 10:24 pm

      Alhamdulillah, salam kenal juga Arie. Semoga sukses selalu. Amin, & semoga kita kedepannya dapat menjadi lebih baik lagi.

       
      • Arieabdul

        Juni 8, 2012 at 12:34 am

        mohon sharing nya untuk gimana caranya bisa menjadi terbaik di campus, mas… hehe
        saya di Polman-Teknik Manufaktur, mas.. baru mau masuk nanti juli..
        Semoga bisa menjadi Ahli Teknik nih, Insinyur😀
        Aamiin

         
      • Duddy Arisandi

        Oktober 3, 2012 at 9:03 am

        Saya juga sedang berusaha Arie, banyak berdoa saja dan berusaha. Sukses selalu ya.

         
  17. sahril

    September 4, 2012 at 2:02 am

    Assalamualaikum pak….
    baru kali ini membaca profil bapak.Rasanya masih ingin belajar lagi pak sama bapak.
    Btw artikel tentang PPC koq udah nga ada di Blog Bapak.?
    Kebetulan sekarang saya di bagian PPC lagi pak

     
    • Duddy Arisandi

      September 9, 2012 at 10:18 pm

      Insyaallah ada, silahkan dibuka di karya tulisku dan sistem produksi. Filenya ada kok. Sukses selalu ya.

       
    • Duddy Arisandi

      Oktober 3, 2012 at 9:03 am

      Insyaallah ada, silahkan buka di menu Karya tulisku. Sukses selalu, dan jangan lupa sama almamaternya.

       
  18. andre saefulloh

    Oktober 3, 2012 at 2:59 am

    assalamualaikum mas,
    saya andre DD92/95 pms-polman, alhamdulillah masih ada orang kaya mas duddy yg mau berbagi ilmu dengan gratis, tulisannya sangat bermanfaat buat saya khususnya, minta ijin saya mau pake sebagian ilmunya yah:) jazakumulloh khoiron katsiro, mudah-mudahan saya juga ingin seperti itu bisa berbagi. sy lagi belajar wiraswasta di bidang art, tetapi dengan dibantu CNC (maklum basic dari polman) silakan lht2 di multigrahacipta.com, semoga tambah sukses mas! dengan berbagi insya Alloh pasti tambah “kaya”

     
    • Duddy Arisandi

      Oktober 3, 2012 at 9:02 am

      Wa’alaykumsalam Andre, silahkan Andre. Saya juga belajar banyak dari Bp. Djodi IndraKesumo, Pak Kokok Haksono, Pak Hadi Waratama, Pak Iwan Haryanton, Pak Ismet, Pak Yureman Zain. Melalui beliau, tulisan itu bisa saya realisasikan. Beberapa file dapat diunduh di MenuMenu yang ada. Sukses selalu.

       
    • Duddy Arisandi

      Februari 14, 2013 at 3:47 am

      Wa’alaykumsalam Andre.
      Monggo mas, silahkan.
      Jangan lupa ilmunya di share juga ya.

       
    • Duddy Arisandi

      Juli 16, 2013 at 3:30 pm

      wa’alaykumsalam,
      Terimakasih atas commentnya, semoga bermanfaat dan dapat saling mengisi.
      Jazakumullah khoiron katsiro

       
  19. suharto

    Oktober 20, 2013 at 12:04 am

    assalamualaikum pak Duddy..
    terimakash atas berbagi ilmunya, sangat bermanfaat
    saya bekerja di Politeknik Semarang, apakah ada gambaran model manajemen pendidikan berbasis industri,,,?
    sebelumnya diucapkan terimakasih atas jawaban Bapak…

     
    • Duddy Arisandi

      Oktober 25, 2013 at 2:39 am

      Wa’alaykumsalam,
      Mohon maaf saya terlambat merespons Pak Suharto.
      Mengenai gambaran model manajemen pendidikan berbasis industri, sangat banyak metodenya Pak dan tergantung dari core compretency politekniknya. Untuk pendekatan yang aman, kita mengacu pada standard akreditasi BAN-PT dan Peraturan Pemerintah tentang Pendidikan (umumnya guide line yang tertuang pada statuta pt). Insyaallah jika kita taat azas, dengan berbekal kedua regulasi tersebut, pendidikan kita akan maju. Untuk standard menjalankan fungsi organisasi, sebaiknya ada standard lain yang disertakan semisal ISO / Standard lainnya (audit oleh eksternal). Jika memungkinkan fungsi-fungsi aliran manufaktur / layanan jasa yang ada di Industri/perusahaan, diinseminasikan ke dalam struktur organisasi pendidikan yang ada. Insyaallah Pak, dgn model manajemen yg dipandu oleh DIKTI , sangat ampuh selama kita taat azas.
      Terimakasih atas masukannya Pak, sangat berarti sekali untuk pengembangan kami.
      Wassalamu’alaykum

       
  20. Muhammad Baiquni

    November 7, 2013 at 4:26 pm

    Keren blognya Pak Duddy😀

    Btw, saya juga punya blog loh, Pak. Dan makasih ya untuk bahan anteknya😀

     
    • Duddy Arisandi

      November 8, 2013 at 4:17 am

      alhamdulillah Mas, baru belajar juga nih. Sudah lama tidak menulis lagi (TST : sibuk banget di FTMD).
      Your welcome, jangan lupa buka blended-learning, ada Pesan dari Bpk. Nathanael P. Tandian.
      Wassalam
      Duddy

       
  21. anto

    November 23, 2015 at 8:30 am

    keren blog nya.
    punya artikel tentang dies maintenance gak pak.thnx

     
    • Duddy Arisandi

      November 24, 2015 at 5:19 am

      Dear Mas anto,
      Mohon maaf saya tidak punya mas. Bidang dies bukan keahlian saya,
      Mudah-mudahan bisa saya carikan literaturnya ke teman-teman.
      Sudahkah mengecek ke Polman untuk literaturnya ?
      Wassalam
      Duddy Arisandi

       
  22. Hambali

    April 12, 2016 at 12:40 am

    Salamun ‘alaikum.
    Apa kabar kawan?.
    Sejak lulus S1 khusus di ITB kita belum pernah jumpa lagi kawan. Ya sangat lama sekali, lebih dari 15 tahun kita tidak pernah bertemu muka atau berkomunikasi.
    Tolong beri no HP ya

     
    • Duddy Arisandi

      April 12, 2016 at 1:00 am

      Wa’alaykumsalam Mas, Piye kabare ? Mudah-mudahan bisa silaturahim kembali. Saya di 0811421269 mas.

       
  23. Anwar S. Ardjo.

    Juli 4, 2016 at 8:35 am

    Selamat sore dan selamat menjalankan ibadah puasa
    Salam kenal,
    saya Anwar S. Ardjo dosen politeknik negeri semarang, sudah membaca artikel tentang “PERUBAHAN PARADIGMA DALAM MENYUSUN / MEREKONSTRUKSI KURIKULUM TEKNIK MESIN BERDASARKAN KERANGKA KUALIFIKASI NASIONAL INDONESIA (KKNI), SNPT (STANDAR NASIONAL PENDIDIKAN TINGGI), DAN LSP-LMI (LEMBAGA SERTIFIKASI PROFESI-LOGAM DAN MESIN INDONESIA), ” untuk melngkapi persiapan saya dalam menyusun revisi kurikulum D3 taknik mesin, mohon berkenan dapat mengirimkan file gambar gambar pada aartikel tersebut yang tidak dapat dibaca. misalnya gambar-0, gambar-10, gambar- 14, tabel-1, tabel-2. Maaf semua gambar dan tabel.

    Saya sudah baca seulruh profil Anda, luar biasa. Saya sangat merekomendasikan agar sekali waktu menjadi penuaji makalah di Politeknik Negeri semarang.

    Terima kasih atas bantunnya.

    Salam,
    Anwar S. Ardjo.
    ardjo.anwars@gmail.com

     
    • Duddy Arisandi

      Juli 19, 2016 at 12:51 pm

      Selamat malam Pak, mohon maaf saya terlambat merespons surat Bapak, karena baru cuti. Insyaallah semua file yang bapak perlukan akan saya kirim besok Pak. Insyaallah kalau saya diundang akan silaturahim ke Politeknik Negeri Semarna Pak. Dan beberapa dosen disana dulu sempat kuliah bareng di ITB (Bapak Hambali & Bapak Vinansius). Sukses selalu Pak.
      Wassalam
      Duddy Arisandi

       
  24. iman santoso

    November 11, 2016 at 7:25 am

    Ass Mas sy mau diskusi utk bidang pendidikan tinggi berbasis KKNI utk program pendidikan Politeknik D4

     
    • Duddy Arisandi

      November 11, 2016 at 12:18 pm

      Wa’alaykumsalam,
      silahkan mas, saya tunggu suratnya di duddy_arisandi@yahoo.com., Mohon diinfokan saja apa yang bisa saya bantu untuk mempersiapkannya.
      Wassalamu’alaykum
      Duddy Arisandi

       

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout / Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout / Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout / Ubah )

Foto Google+

You are commenting using your Google+ account. Logout / Ubah )

Connecting to %s

 
%d blogger menyukai ini: